| Customization: | Available |
|---|---|
| After-sales Service: | Qualiy Problems Will Check Then Solve It |
| Warranty: | 10 Years |
|
Still deciding? Get samples of US$ 0/PCS
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Thickness | 7mm |
| Width | 25cm |
| Length | 5.8m or 5.95m |
| Weight | 2.1 kg/m2 2.2KG/SQM 2.3KG/SQM 2.5KG/SQM 2.8KG/SQM |
| Finish | Printing Color, Hot stamp Foil, Laminated Film .High glossy |
| Surface | flat,wave |
| PVC content | 30%,40%,50% or customized |
| Loading | 20' FT or 40' HQ |
| Material | PVC resin, calcium carbonate |
| Application | ceiling & wall decoration in bedroom , kitchen etc. |
| Certificate | ISO 9001:2008 |
| Resistence | fireproof , waterproof , aging resistence |
| Colors | more than 1000 colors |
| Delivery port | shanghai or ningbo |
Once you have decided where you are fitting your panels you need measure the width and the height of each wall you are fitting onto. Our panels can be laid vertically or horizontally however this will depend on your room dimensions whether this is possible or not due to the length of the panels.
Our PVC cladding panels are made from durable waterproof PVC material and have a corrugated structure which makes them strong, lightweight and helps with insulation. The panels are tongue and groove and slot together quickly and easily.
Our PVC panels can be cut easily with basic hand tools such as a Stanley knife, hacksaw or even circular saw. If using a Stanley knife simply score across the width of the panel and then it should break off in a straight line.
Our panels can easily be installed onto plasterboard, existing tiles or wooden framework.
For plasterboard and wooden framework screws or staples will be fine, but for tiles you will need to use solvent free adhesive.
The method above also applies to ceilings, if you are fitting spot lights, bear in mind the position of the studs and leave room for any wiring or fittings. You can use hold cutters for light fittings or wires.
To attach using screws you screw through the lip of the panel and when your next panels slots into place, it will cover the screws. You can screw straight onto plasterboard as well as a timber framework.
You can also use solvent free adhesive to attach your panels to your wall, we only recommend using the adhesive if your panels are going onto plasterboard or other solid surface, if you are using a wooden framework then screws or staples would be recommended.
You can either run the glue down the panel in an S shape (shown left), or just dot and dab (shown right).
We provide a wide range of pvc acessory suitable for all corners and edges.
Once your panels are installed you will likely need to mount things to your wall such as units, showers or other items. Due to the nature of the panels it is strongly recommended that the panels are not used to bear any load, you should screw through to the supporting wall so that the wall itself is supporting the weight and the items are just sitting flush against the panels.
While the panels themselves are waterproof we do recommend a very small amount of clear silicone in the groove of each panel if they are to be used in a wet area such as a shower enclosure or wet room.
GOOD BENDING QUALITYPackaging & Shipping:
){kind=link}